HEAVY DUTY LATHE MACHINE
HARDENED BED WAYS ( Size : 5'- 6" to 22' )
Technical Specification
Particulars
Model-1
Model-2
Model-3
Model-4
Model-5
Length of Bed
5'6" (1676)
7' (2134)
9' (2743)
10' (3048)
12' (3658)
Height of Center
10' (250)
10' (250)
10' (250)
10' (250)
10' (250)
Maxi. Swing over Bed
18' (450)
18' (450)
18' (450)
18' (450)
18' (450)
Maxi. Swing over Carraige
10' (255)
10' (255)
10' (255)
10' (255)
10' (255)
Admit between centres
20' (508)
38' (965)
62' (1574)
74' (1880)
98' (2490)
Width of Bed
12.3/4' (323)
12.3/4' (323)
12.3/4' (323)
12.3/4' (323)
12.3/4' (323)
Length of gap
12' (305)
12' (305)
12' (305)
12' (305)
12' (305)
Length of gap infront of faceplate
8' (203)
8' (203)
8' (203)
8' (203)
8' (203)
Dia. of 6TPI spindle nose
3' (76)
3' (76)
3' (76)
3' (76)
3' (76)
Spindle bore
2.1/8' (58)
2.1/8' (58)
2.1/8' (58)
2.1/8' (58)
2.1/8' (58)
Lead screw
4 TPI
4 TPI
4 TPI
4 TPI
4 TPI
Power Required (Phase 440v)
2 H.P
2 H.P
2 H.P
3 HP
3 HP
V-belt / flat belt
C-72/2'x 78'
C-72/2'x 78'
C-72/2'x 78'
C-72/2'x 78'
C-72/2'x 78'
RPM can be obtained low/high
25 / 450
25 / 450
25 / 450
25 / 450
25 / 450
Overall Dimen. LxWxH
6'x3.1/2'x4.1/2'
8'x3.1/2'x4.1/2'
8'x3.1/2'x4.1/2'
11'x3.1/2'x4.1/2'
13'x3.1/2'x4.1/2'
STANDARD ACCESSORIES :
Chuck plate, Face plate, Change gear set (inch & mm), toolpost key, 2 nos dead centres, 1 nos centre adptors.
ALSO AVAILABLE AT EXTRA COST :
More centre Height, V-belt Driven, Flame Hardned bed
